Hello everyone, today we look at a 3m*400mm stroke CNC drilling and tapping machine.

Our CNC drilling and tapping machine using the machining center special programming free CNC system, no need for professional personnel to operate the machine, no programming experience, after our professional technical staff on-site training, you can be independently completed within 3 hours.

Then our CNC drilling and tapping machine uses the spindle is the servo spindle, our this is for hot melt to do, can also be used as an ordinary drilling and tapping ah, we use the spindle torque is 10 nm to 15 nm, the speed is relatively low is less than 3,000 RPM. Of course, we also have tens of thousands of turns of the spindle, which can be selected according to your product.

The stroke of CNC drilling and tapping machine can also be customized within 1-10 meters, our model is based on customer products to do three stations ah, that is, when processing on this side, the workers can be loaded and loaded, so as to achieve the state of loading and unloading without stopping, and then the multi-station is to reduce the time difference between replacing products, improve efficiency.

Our CNC drilling and tapping machine uses a sliding table, the accuracy is calibrated well ah, tooling you can move freely, do not need to go to correction.

Source of this article: http://www.duomicnc.com/