This product is a special water distributor accessories for the floor heating industry. Thread holes of G1/8 specifications need to be processed on it. Customers have high processing accuracy requirements for water distributor accessories. Specifically, we use a gantry CNC drilling and tapping machine, the surface of the water separator accessories need to be leveled, and the inner wall of the hole should not appear burrs during the stretching process.

Therefore, in the processing of Longmen CNC drilling and tapping machine, we increase the hot melt drilling, hot melt tapping, milling plane and razor deburring four processes to ensure product quality. Through the gantry type CNC drilling and tapping machine after processing the water separator accessories, the overall forming effect is good, can meet the customer's requirements for product accuracy and appearance. The overall pass rate of the product was increased to 99.8% and the surface roughness reached Ra0.8μm, which fully met the requirements of sealing and durability of the water distributor system.

Source of this article: http://www.duomicnc.com/